ULTIMATE HIGH TEMPREATURE CLAY BASED GREASE HT1 HT-EP1

,

ULTIMATE HIGH TEMPREATURE CLAY BASED GREASE HT1 HT-EP1

LUBENZ ULTIMATE HIGH TEMPERATURE CLAY BASED GREASE are high temperature greases, formulated with bentonite clay based thickener and extreme pressure additive system to provide extra protection against wear, rusting and water washout especially in industrial equipment operating under heavy loads and high temperatures. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 150 & 320. It retains its consistency at high temperatures and provides good storage stability.

Packaging

1 KG, 15 KG, 18 KG, 180 KG, 250 gms, 3 KG, 500 gms

Features & Benefits

Outstanding Non-melting capability – protects bearing at very high operating temperatures where
conventional soap-based greases fail to provide satisfactory lubrication.
● Good extreme pressure & anti-wear properties – protects bearing surfaces against severe wear, even
under high load conditions.
● Excellent Oxidation and Thermal stability – protects against deposit formation at very high operating
temperatures, thus maintains the life and performance of grease.
● Excellent resistance to water washout – resists washout of grease in equipment and provides good
lubrication even in presence of water.
● Excellent retention of consistency – resists grease softening in application, where very high temperatures
and mechanical working leads to subsequent loss of lubrication performance and leakage.

Applications

LUBENZ ULTIMATE HIGH TEMPERATURE CLAY BASED GREASE are suitable for below applications:
● Drying Ovens
● Jaw Crushers
● Kiln cars
● Steel Mills
● Hot Rolling Mills
● Aluminum, Cement, Glass and Rubber plants

Characteristics

LUBENZ ULTIMATE HIGH TEMPERATURE CLAY BASED GREASE

Test Method

Units

HT-EP00

HT-EP0

HT-EP1

HT-EP2

HT-EP3

NLGI Grade

ASTM D 217

—

00

0

1

2

3

Thickener Type

—

—

Bentonite Clay

Bentonite Clay

Bentonite Clay

Bentonite Clay

Bentonite Clay

Penetration,

Worked @ 25 0C

ASTM D 217

0.1mm

400-430

355-385

310-340

265-295

220-250

Viscosity @ 40 0C

ASTM D 445

cSt

320

160

160

160

160

Dropping Point

ASTM D 566

°C

–

>300

>300

>300

>300

4-Ball Wear, Scar

ASTM D 2266

mm

0.5

0.4

0.4

0.4

0.4

4-Ball Weld Load

ASTM D 2596

Kg

240

250

250

250

250

The above figures are typical of blends with normal production tolerance and do not constitute a specification.