LUBENZ PREMIUM PEO SAE 40 SJ series are monograde crankcase lubricants formulated with high quality base stocks and balanced additive system to provide high level of engine protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most mixed fleet applications and is suitable for general service and commercial engines.
PREMIUM PEO SAE 40 SJ
Automotive, Lubricants
PREMIUM PEO SAE 40 SJ
| Packaging | 1L, 208L, 20L, 25L, 4L, 5L, IBC |
|---|
Features & Benefits
- Premium protection against viscosity shearing and thermal breakdown.
- Good engine cleanliness, due to improved detergency and dispersancy.
- Good wear protection and improved resistance to oxidation.
- Premium sludge protection for greater engine reliability.
- Low oil consumption due to very less evaporation of base stocks.
Applications
LUBENZ PREMIUM PEO is suitable for use in the following:
- Automotive gasoline and diesel engines.
- Passenger cars, SUVs, light trucks and vans.
- Moderate-duty LPG vehicles.
- Suitable for gear and hydraulic applications, if approved.
Characteristics
Specifications LUBENZ PREMIUM PEO meets or exceeds following International and Builder specifications:
- API SC/CC, SF/CD, SJ/CF, SL/CF, SL/CF, SF/CC, SG/SH, SJ/SL/CF, SL/CF, SC/CC, SF/CC, SG/SH, SJ/SL/CF, SL/CF
Typical Characteristics
|
LUBENZ PREMIUM PEO |
Test Method |
Units |
30 |
40 |
50 |
|
Density @ 15 0C |
ASTM D 4052 |
gm/cc |
0.892 |
0.900 |
0.904 |
|
Viscosity @ 100 0C |
ASTM D 445 |
cSt |
11.60 |
15.40 |
20.20 |
|
Viscosity @ 40 0C |
ASTM D 445 |
cSt |
102 |
158 |
234 |
|
Viscosity Index |
ASTM D 2270 |
– |
100 |
99 |
99 |
|
Pour Point |
ASTM D 97 |
°C |
-18 |
-18 |
-18 |
|
Flash Point (COC) |
ASTM D 92 |
°C |
230 |
236 |
242 |
|
Total Base Number |
ASTM D 2896 |
mg KOH/g |
5.8 |
5.8 |
5.8 |
|
Phosphorous |
ASTM D 4951 |
%wt |
0.078 |
0.078 |
0.078 |
The above figures are typical of blends with normal production tolerance and do not constitute a specification.
