LUBENZ MOTOBACK GF-6A is a premium quality, full-synthetic automotive engine oil designed to provide maximum engine protection for both turbocharged gasoline direct injection, conventional gasoline-fueled and flex-fueled passenger cars and light trucks under all operating conditions. It is particularly recommended for vehicles operating at extreme temperatures or under severe driving conditions, such as towing heavy loads. LUBENZ MOTOBACK GF-6A exceeds new car warranty requirements as defined by ILSAC GF-6. It is uniquely formulated to help combat low speed pre-ignition (LSPI) in turbocharged gasoline direct injection engines. It meets or exceeds “Resource Conserving” requirements for fuel economy improvement, emission system and turbocharger protection, and protection of engines operating on ethanol-containing fuels up to E85. It is backward serviceable for use where API SN or earlier “S” category engine oils are recommended.
MOTOBACK 0W20 GF-6A
MOTOBACK 0W20 GF-6A
| Packaging | 1L, 208L, 20L, 25L, 4L, 5L, IBC |
|---|
Features & Benefits
- Helps protect against low speed pre-ignition (LSPI) in turbocharged gasoline direct injection engines (TGDI)
- Exceeds ILSAC GF-6 requirements for new cars under warranty
- Enhanced performance benefits at extreme temperatures compared with conventional engine oils
- Outstanding resistance to viscosity and thermal breakdown at high temperatures
- Protects against sludge and varnish formation
- Protects against rust and bearing corrosion
- Low volatility for reduced oil consumption
- Excellent low temperature pumpability for protection during cold starts
- Highly resistant to foaming
- Formulated to protect turbochargers and emission control system catalysts
Applications
- Turbocharged gasoline direct injection, conventional gasoline-fueled and flex-fuel passenger cars,
light trucks and sport utility vehicles, including gasoline-electric hybrids, especially when operating under severe conditions
- Four-stroke cycle gasoline engines in other mobile or stationary equipment
LUBENZ MOTOBAK GF-6A is formulated with synthetic base stocks. The full synthetic formulation provides improved protection against viscosity breakdown and deposit formation at high temperatures; lower volatility for reduced oil consumption; and faster oil circulation at low temperatures for easier starting and better protection during cold starts when compared with conventional engine oils.
Characteristics
|
TYPICAL TECHNICAL PROPERTIES |
|||||
|
LUBENZ MOTOBAK GF-6A |
|||||
|
Viscosity Grade, SAE J300 |
0W-16 |
0W-20 |
5W-20 |
5W-30 |
10W-30 |
|
PRODUCT CODE |
11458HT-1 |
11458HT-2 |
11458HT-3 |
11458HT-4 |
11458HT-5 |
|
Density at 15.6˚C, g/ml, ASTM D4052 |
0.846 |
0.846 |
0.848 |
0.852 |
0.853 |
|
Color, ASTM 6045 |
3.0 |
0.848 |
0.852 |
0.853 |
0.846 |
|
Cold Cranking Viscosity (CCS), mPa s, ASTM D5293 |
5000 @-35˚C |
5900 @-35˚C |
3650 @-30˚C |
4900 @-30˚C |
4000 @-25˚C |
|
Kinematic Viscosity at 40˚C, mm²/s, ASTM D445 |
37.3 |
45.2 |
45.4 |
63 |
69.7 |
|
Kinematic Viscosity at 100˚C, mm²/s, ASTM D445 |
7.3 |
8.5 |
8.7 |
11.1 |
11.8 |
|
Viscosity Index, ASTM D2270 |
163 |
168 |
165 |
167 |
166 |
|
Flash Point(COC), °C, ASTM D92 |
228 |
230 |
228 |
234 |
232 |
|
Pour Point, °C, ASTM D97 |
-42 |
-45 |
-42 |
-42 |
-39 |
|
Total Base Number, mg KOH/g, ASTM D2896 |
7.0 |
7.9 |
7.0 |
8.6 |
7.0 |
|
Sulfated Ash, wt%, ASTM D 874 |
0.9 |
0.9 |
0.9 |
0.9 |
0.9 |
|
High-Temperature/High-Shear Viscosity @ 150ºC, cP, ASTM D4683 |
2.3 |
2.6 |
2.6 |
3.0 |
3.4 |
|
Phosphorus, wt %, ASTM D5185 |
0.077 |
0.077 |
0.077 |
0.077 |
0.077 |
|
Zinc, wt %, ASTM D5185 |
0.085 |
0.085 |
0.085 |
0.085 |
0.085 |
