LUBENZ LUBETHERM HEAT TRANSFER OIL 32 ISO 32 are high performance HTOs formulated from highly refined base stocks that are resistant to thermal cracking and chemical oxidation & are intended for use in closed indirect heating installations. The flash points of these oils will not decrease significantly in service because of their resistance to thermal cracking at the operating temperatures for which they are recommended.
LUBETHERM HEAT TRANSFER OIL 32 ISO 32
Industrial, Lubricants
LUBETHERM HEAT TRANSFER OIL 32 ISO 32
| Packaging | Drums, Pail |
|---|
Features & Benefits
- Performance and reliability, even in severe applications.
• High resistance to thermal cracking and decomposition
• Excellent thermal properties
• Good thermal and oxidative stability
• Improves operating efficiency of heat transfer system
• Maintains viscosity and film thickness at high temperatures to help protect equipment
• Freedom from sludge and coke deposits
• Good low temperature fluidity
• Product integrity assurance through independent verification.
Applications
LUBENZ LUBETHERM HEAT TRANSFER OIL are recommended for use in open and closed installations where the bulk oil temperature ranges are as outlined in the table below and where minimum shutdown temperatures are not below -7ᵒC.
•Bulk Oil Temperature Ranges for LUBENZ LUBETHERM HTO 22: Closed Systems (-7ᵒ C to 285ᵒ C), Open Systems (-7ᵒC to 150 ᵒC)
•Bulk Oil Temperature Ranges for LUBENZ LUBETHERM HTO 32: Closed Systems (-7ᵒC to 315 ᵒC), Open Systems (-7ᵒC to 180 ᵒC)
•Closed, cold-oil sealed, indirect heating and cooling systems in all kinds of industrial processes operating at bulk oil
temperatures up to the maximum temperatures quoted in the table above and at atmospheric pressure.
•Open systems provided the bulk temperatures do not exceed the maximum temperatures quoted in the table above.
LUBENZ LUBETHERM HEAT TRANSFER OIL are thermally stable and are capable of an extremely long service life
without deposit formation or viscosity increase. They demonstrate specific heats and thermal conductivities that provide more rapid heat dissipation. They have good heat transfer efficiency and their viscosities are such that they can be pumped readily at both start-up and operating temperatures.
Characteristics
|
TYPICAL TECHNICAL PROPERTIES |
||
|
LUBENZ LUBETHERM HTO |
22 |
32 |
|
Product code |
12570IL |
12571IL |
|
Density at 15°C, g/ml, ASTM D4052 |
0.843 |
0.857 |
|
Kinematic Viscosity at 40°C, mm²/s, ASTM D445 |
20.2 |
29 |
|
Kinematic Viscosity at 100°C, mm²/s, ASTM D445 |
4.2 |
5.1 |
|
Flash Point(COC), °C, ASTM D92 |
190 |
220 |
|
Pour Point, °C, ASTM D97 |
-6 |
-6 |
|
Micro-carbon Residue, (Conradson), wt %, ASTMD4530,(max) |
0.05 |
0.05 |
|
Copper Strip Corrosion, 3 hrs @ 100º C, ASTM D 1301A |
1A |
1A |
